LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-50 S Select >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> Vehicle Control Module (VCM) Initial Setting
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Vehicle Control Module (VCM) Initial Setting

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Activate the M-MDS and perform the following procedure.
    1. Press [Start] to start the vehicle identification.
    2. Press the [Toolbox] tab.
    3. Press the [Work Support] icon.
    4. Press [BRAKES].
    5. Press [Run] for [Calibrating Yaw Rate for VCM].
    6. Confirm the Calibrating Yaw Rate for VCM procedure from Step (7) to Step (10) and press [Next].
    7. Verify that the ignition is switched ON (engine off) and press [Next].
    8. Press [Next] to perform [Calibrating Yaw Rate for VCM].
    9. When the M-MDS processing is completed, press [Next].
    10. Press [Next] to complete [Calibrating Yaw Rate for VCM].
scientia non olet · About LEMON Manuals