LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-50 S >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Windshield Removal >> Not Reusing Windshield
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Not Reusing Windshield

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION .)
    3. Windshield wiper motor (See WINDSHIELD WIPER MOTOR AND LINK REMOVAL/INSTALLATION .)
    4. Front fender molding (See FRONT FENDER MOLDING REMOVAL/INSTALLATION .)
    5. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
    6. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION .)
    7. Front map light (See FRONT MAP LIGHT REMOVAL/INSTALLATION .)
    8. Assist handle (front) (See ASSIST HANDLE REMOVAL/INSTALLATION .)
    9. Sensor cover (See SENSOR COVER REMOVAL/INSTALLATION .)
    10. Forward sensing camera (FSC) (With forward sensing camera (FSC)) (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
    11. Rain sensor (See RAIN SENSOR REMOVAL/INSTALLATION .)
    12. Auto-dimming rearview mirror (With auto-dimming rearview mirror) (See AUTO-DIMMING REARVIEW MIRROR REMOVAL/INSTALLATION .)
    13. Rearview mirror (Without auto-dimming rearview mirror) (See REARVIEW MIRROR REMOVAL/INSTALLATION .)
  3. Set the headliner aside. (See HEADLINER REMOVAL/INSTALLATION .)
  4. Disconnect the windshield wiper de-icer connector. (With windshield wiper de-icer)
    G15742766Courtesy of MAZDA MOTORS CORP.
  5. Remove the wiring harness clip. (With windshield wiper de-icer)
  6. Apply protective tape along the edge of the body.
    CAUTION:
    • Overlap and adhere the protective tape to the corners to prevent damage.
    G15742767Courtesy of MAZDA MOTORS CORP.
  7. Remove the windshield molding by pulling it outward.
    NOTE:
    • If it is difficult to remove the windshield molding, use a heat gun or the like to warm the windshield molding before removing it.
    G15742768Courtesy of MAZDA MOTORS CORP.
  8. Cut out the sealant all around the glass using a sealant remover.
    NOTE:
    • If it is difficult to cut the sealant, use piano wire and follow the procedure under [Reusing the windshield].
    G15742769Courtesy of MAZDA MOTORS CORP.
  9. Remove the windshield.
scientia non olet · About LEMON Manuals