LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> MX-5 Miata Club >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Drive Selection System >> Drive Selection Switch Inspection >> Resistance Inspection
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Resistance Inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the drive selection switch. (See DRIVE SELECTION SWITCH REMOVAL/INSTALLATION .)
  3. Measure the resistance between drive selection switch terminals B and C under the following conditions.

    Resistance when drive selection switch pressed to SPORT side (forward) and held 

    • 0 ohms

    Resistance when drive selection switch pressed to - side (backward) and held 

    • 465.3-474.7 ohms

    Resistance when any switch not pressed 

    • 2643.3-2696.7 ohms
    G14588448Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals