Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PIDs APP1 and APP2. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
- Compare the voltage and opening angle indications for the PIDs APP1 and APP2 with the standard in the table indicated below.
- If they do not match the standard, replace the PCM. (See PCM REMOVAL/INSTALLATION .)
- If they match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD SPECIFICATION
| Condition | APP1 | APP2 | ||||||
|---|---|---|---|---|---|---|---|---|
| V | % | V | % | |||||
| Accelerator pedal released | Approx. 0.75 | Approx. 15 | Approx. 0.38 | Approx. 7.45 | ||||
| Accelerator pedal depressed | Approx. 3.94(1)/4.54(2) | Approx. 78.8(1)/90.98(2) | Approx. 1.97(1)/2.27(2) | Approx. 39.4(1)/45.49(2) | ||||
|
||||||||