DTC B14F3-87: Communication Error Between Vehicle Control Module (VCM) And Driver Monitoring Camera Unit
B14F3: 87 (VCM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Communication error between vehicle control module (VCM) and driver monitoring camera unit |
| Detection condition |
- The vehicle control module (VCM) detects that the driver monitoring camera unit received a communication error with the vehicle control module (VCM).
|
| Fail-safe |
(See DTC TABLE [VCM]
.) |
| Possible cause |
- Internal malfunction related DTCs are stored in the following modules.
- DTCs other than B14F3: 87 are stored in the vehicle control module (VCM). (See DTC TABLE [VCM]
.)
- Driver monitoring camera unit malfunction (Refer to applicable DRIVER MONITORING CAMERA UNIT REMOVAL/INSTALLATION
in the service information.)
- Vehicle control module (VCM) malfunction (built into body control module (BCM)) (Refer to applicable BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
in the service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
|
| System wiring diagram |
|