DTC U2512-82: Error Signal Received From 360°View Monitor Control Module/Parking Assist Unit (Optical)
U2512: 82 (VCM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from 360°view monitor control module/parking assist unit (optical) |
| Detection condition |
- The vehicle control module (VCM) receives an error signal from the 360°view monitor control module/parking assist unit (optical).
|
| Fail-safe |
(See DTC TABLE [VCM]
.) |
| Possible cause |
- Internal malfunction related DTCs are stored in the following modules.
- DTCs are stored in the 360°view monitor control module/parking assist unit (optical). (See DTC TABLE [VMC]
.)
- 360°view monitor control module/parking assist unit (optical) malfunction (Refer to applicable 360DEGREESVIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION
in workshop manual.)
- Vehicle control module (VCM) malfunction (built into body control module (BCM)) (Refer to applicable BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
in workshop manual.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
|
| System wiring diagram |
|