DTC B10A4-86: Error Signal Received From Swivel Actuator (RH) [Adaptive Front Lighting System (AFS) Control Module]
B10A4: 86 (ALH/AFS/ALV) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from swivel actuator (RH) |
| Detection condition |
- The adaptive front lighting system (AFS) control module received error signal from the swivel actuator (RH).
|
| Fail-safe |
- The swivel actuator (RH) is moved to the center or stopped at the position when the malfunction is determined.
- The swivel actuator (LH) is moved to the center.
- Control of the headlight auto leveling system is continued with the headlight leveling actuator positioned-0.65° from where the malfunction is determined.
|
| Possible cause |
- Front combination light (RH) malfunction (Refer to applicable FRONT COMBINATION LIGHT REMOVAL/INSTALLATION
in the service information.)
- Adaptive front lighting system (AFS) control module malfunction (Refer to applicable ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE REMOVAL/INSTALLATION
in the service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
|
| System wiring diagram |
|