DTC U0320-82: Error Signal Received From Electric Power Steering (EPS) Control Module (BCM)
U0320: 82 (BCM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Error signal received from electric power steering (EPS) control module |
| Detection condition |
- The body control module (BCM) received CAN error signal from the electric power steering (EPS) control module.
|
| Fail-safe |
|
| Possible cause |
- DTCs are stored in the electric power steering (EPS) control module. (See DTC TABLE [EPS]
.)
- Electric power steering (EPS) control module malfunction (Refer to applicable STEERING GEAR AND LINKAGE REMOVAL/INSTALLATION
in workshop manual.)
- Body control module (BCM) malfunction (Refer to applicable BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
in workshop manual.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
|
| System wiring diagram |
|