Home Link Function Programming
NOTE:
- Three remote controllers can be programmed to the auto-dimming rearview mirror.
- Switch the ignition ON (engine off or on).
- Press the home link button to which you want to program information.
- Verify that the auto-dimming rearview mirror indicator light (amber) turns on.
- Move the remote controller you want to program close to the home link button at a distance of 2.5 to 7.5 cm {0.98 to 2.95 in}.
- Press and hold the button on the remote controller you want to program until the indicator light of the auto-dimming rearview mirror changes from amber to green.
- Press the home link button and perform the programming completion verification.
- If the indicator light (green) turns on: Programming completed
- If the indicator light (green) flashes: Press and hold the home link button for 2 s, up to 3 times.