Inspection/action procedure
- Proceed with the inspection/action in the order from Step 1 below.
- After part repair or replacement, perform the repeatability verification procedure and perform a DTC inspection. (See DTC INSPECTION
)
- If the DTC inspection indicates the same DTC again, go to the next step.
- Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system.
Purpose/reason (possible cause) Malfunction in CAN communication line between 360° view monitor control module/parking assist unit(optical) and vehicle control module(VCM) Referred to service information item See MALFUNCTION DIAGNOSIS FLOW [CONTROLLER AREA NETWORK (CAN)]