LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 1990 >> 350SD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - Basic Testing) >> EZL Electronic Ignition Checks >> Crankshaft Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1992 Mercedes-Benz 500E, 1992 Mercedes-Benz 400E, 1992 Mercedes-Benz 300TE, 1992 Mercedes-Benz 300E, and 1992 Mercedes-Benz 300D. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect crankshaft position sensor harness connector plug (Green wire) from EZL ignition module. Ensure resistance of sensor is 680-1200 ohms. If resistance is not as specified, replace crankshaft position sensor.

NOTE: For all other ignition tests, see appropriate G - TEST W/ CODES and I - SYS/COMP TESTS articles in the ENGINE PERFORMANCE section.
scientia non olet · About LEMON Manuals