LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 1994 >> SL320 >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - System & Component Testing) >> Me-SFI Control Module Connector Identification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Me-SFI Control Module Connector Identification

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 Mercedes-Benz SL600, 2001 Mercedes-Benz SL600, 2000 Mercedes-Benz SL600, 1999 Mercedes-Benz SL600, and 1998 Mercedes-Benz SL600. However, it is still accessible from the selected car via links, so may be relevant.

Vehicle is equipped with 2 ME-SFI control modules, right cylinder bank ME-SFI control module (N3/12) and left cylinder bank ME-SFI control module (N3/11). Each ME-SFI control module has 2 connectors, No. 1 and No. 2. Connector No. 1 has terminals No. 1-61 and connector No. 2 has terminals No. 62-117. Both ME-SFI control modules are located next to each other in right rear corner of engine compartment. Right cylinder bank ME-SFI control module (N3/12) is located nearest to passenger fender. Left cylinder bank ME-SFI control module (N3/11) is located farthest from passenger fender. For ME-SFI connector identification, see Fig 1 .

Fig 1: ME-SFI Control Module Connector Terminal Identification
G99G05915Courtesy of MERCEDES-BENZ OF NORTH AMERICA.