Automatic locking, function - GF80.20-P-4009A

MODEL 202 as of 1.6.97, 208, 210.081 /281, 210 (except 210.081 /281) as of 1.3.97 

The initial state is that the vehicle has been unlocked with the remote control key  (or with the lock switches  , ). The automatic locking function locks the vehicle centrally with the exception of the fuel tank flap as soon as the vehicle speed exceeds a threshold of approx. 15 km/h.

The pneumatic system equipment (PSE) control module (combined, A37)  recognizes that the threshold has been exceeded by evaluation of the speed signal from the CAN bus. The PSE control module pneumatically locks the doors. The function of the interior remote trunk release switch  and manual trunk opening  are inhibited.

The vehicle can be unlocked again by opening one of the doors  from the inside or with the interior central locking switch (S6s1)  .

The function can be deactivated with the central locking interior switch (S6/1s2). 

	Interrupting automatic locking operation		GF80.20-P-5000A
	Deactivating automatic locking feature		GF80.20-P-5001A
	Unlocking with remote control key	except model 208.4	GF80.20-P-3006A
	Actuation of lock switches		GF80.20-P-3007A
	Opening trunk lid with interior switch	except model 208.4	GF80.20-P-3012A
	Opening trunk lid manually	except model 208.4	GF80.20-P-3013A
	Unlocking by opening a door		GF80.20-P-3004A
	Locking/unlocking pneumatically		GF80.20-P-4016A
	Pneumatic system equipment (PSE) control module, location/purpose/design/function		GF80.20-P-4106A