Optical alarm, function - GF80.50-P-4006A

MODEL 202 from 1.6.97 to 31.5.98, 208, 210 up to 31.5.98 with CODE (551a) Anti-theft alarm (ATA) 

The PSE control module (combined) (A37)  controls the sequence of the optical signals via the CAN bus. The sequence differs according to the national version and is defined in the PSE version coding.

• ECE: Hazard warning lamps flash at intervals of 2.5 Hz for 5 minutes
• : Fog lamps and tail lamps flash for 2.5 minutes at intervals of 0.8 Hz

The lamps are controlled by the signal acquisition and actuation module (SAM) (N10/1)  .

The following applies for both national versions:

As long as the alarm is present the PSE control module (A37) switches on the rear dome lamp (E15/2) and the overhead control panel control module (N70)  switches on the interior lighting.

The alarm can be discontinued by activating  or deactivating  the ATA  . After discontinuation by activating the ATA  the ATA remains active.

	Acoustic alarm, function		F80.50-P-4005A
	Activating anti-theft alarm (ATA), function	without code 882 (interior motion sensor)	GF80.50-P-2002B
		with code 882	GF80.50-P-2002C
	Deactivating anti-theft alarm (ATA), function		GF80.50-P-2003B
	PSE control module (combined) (A37), location/purpose/design/function		GF80.20-P-4106A