Optical alarm, function - GF80.50-P-4006C

MODEL 202, 208, 210 as of 1.6.98 with CODE (551a) Anti-theft alarm (ATA) 

The PSE control module (combined) (A37)  controls the sequence of the optical signals via the CAN bus. The sequence differs depending on the national coding.

• ECE: lights flash for 5 minutes 2 to 3 times per second
• : fog lamps and taillamps flash for 2.5 minutes approx. once per second

The turn signal lamps are actuated by the signal acquisition and actuation module (SAM) (N10/1)  .

On the version the taillamps are actuated

• directly on model 202 by the PSE control module (A37)
• via the CAN bus by the light module (N7-1)  on models 208 and 210.

The following applies for both national versions as long as the alarm is present:

• the PSE control module (combined, A37) switches on the rear dome lamp (E15/3),
• the overhead control panel control module (N70) switches on the interior lighting.

The alarm can be terminated by activating  or deactivating  the ATA  . After termination by activating  the ATA  the ATA remains active.

Acoustic alarm, function

GF80.50-P-4005C