Electrical System Tests Component Locations (Section 21)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1996 Mercedes-Benz C36, 1996 Mercedes-Benz C280, 1996 Mercedes-Benz C220, 1995 Mercedes-Benz SL320, and 1995 Mercedes-Benz C36. However, it is still accessible from the selected car via links, so may be relevant.
ELECTRICAL SYSTEM TESTS COMPONENT LOCATIONS (SECTION 21)
| Component | See | |
|---|---|---|
| Base Module (N16/1) - Model 129 | Fig 1 | |
| CHECK ENGINE MIL (A1e26) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |
| Data Link Connector - DTC Readout (X11/4) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |
| Diagnostic Module - OBD II (N59/1) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |
| Diagnostic Module - OBD II Generic Scan Tool Connector (X11/22) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |
| DM Pressure Sensor - HFM-SFI (B5/2) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |
| Engine Control Module - HFM-SFI (N3/4) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |
| O2S 2 - After the TWC (G3/1) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |
| Overvoltage Protection Relay Module - 9 Pole (K1/2) - Model 202 | Fig 2 | |
| Purge Control Valve (Y58/1) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |
| Purge Flow Switchover Valve (Y27/6) | ||
| Model 129 | Fig 1 | |
| Model 202 | Fig 2 | |