Programming of control units - AR54.21-P-0014Y: Notes

MODEL 129.058 /063 /067 /076, 163, 164, 168, 169, 170, 171.4, 199, 203, 204, 208, 209, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 461.302 /331 /332 /342 /345, 463.206 /208 /209 /232 /233 /240 /241 /243 /244 /245 /246 /247 /248 /249 /250 /254 /270 /271 /303 /308 /309 /322 /323 /332 /333 /340 /341, 450, 451, 452, 454 Offline programming with SDflash Release CD 

	During the whole work procedure, an adequate voltage supply to the vehicle electrical system is to be ensured as undervoltage can damage the control units.
	Notes on programming control units		AH54.21-P-0001-03Y
1	Connect STAR DIAGNOSIS and start Diagnosis Assistant System (DAS)
	Connect STAR DIAGNOSIS and read out fault memory	Model 129.058/063/067/076, 163, 164, 168, 169, 170, 171.4, 199, 203, 204, 208, 209, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 461.302/331/332/342/345, 463.206/208/209/232/233/240/241/243/244/245/246/247/248/249/250/254/270/271/303/308/309/322/323/332/333/340/341	AD00.00-P-2000-04A
		Model 450	AD00.00-P-2000-04SM
		Model 451	AD00.00-P-2000-04MCC
		Model 452	AD00.00-P-2000-04RR
		Model 454	AD00.00-P-2000-04FF
2	Program control unit		AR54.21-P-0014-01Y
3	Perform SCN coding of control units	Only with exhaust emission-relevant and safety-relevant control units.	AR54.21-P-0015X
4	Carry out sensor rotor adaptation	Only on engine control unit.
5	Read fault memory, erase if necessary
6	Close STAR DIAGNOSIS