Remove/install steering column module - AR54.25-P-2802T

MODEL 211.0 /2 /6 

Up to model year 04 

Fig 1: Identifying Steering Column Module Components - Model 211.0 /2 /6

	Remove/install
1	Remove steering wheel		AR46.10-P-0100T
2	Remove jacket tube switch module (2)		AR54.25-P-2800-01T
3	Remove clock spring contact		AR46.10-P-0200T
4	Remove steering angle sensor		AR46.10-P-0300T
5	Take off cover (1) and remove cruise control pushbutton switch (S40/4) upwards out of steering column switch module (2)	Installation:  Ensure that the studs (3) seat in the bores properly, in the process paying attention to the guides in the CC [TPM] switch (S40/4).
6.1	Take out steering column adjustment switch/ steering wheel heater (S59/1) upwards out of the steering column switch module (2)	On vehicles with steering wheel heater code 443 or with memory package (driver seat, steering column, mirrors) code 275 Installation:  Ensure that the studs (3) seat in the bores properly, in the process pay attention to the guides in the steering column adjustment/steering wheel heater switch (S59/1).
7	Detach combination switch (S4) from steering column switch module (2)
8	Remove steering column module (N80) upwards out of steering column switch module (2)
9	Install in the reverse order
10	Perform function check