Automatic Transmission, Selector Lever Positions (With Code (428A)) Steering Wheel Shift Buttons
Fig 1: Automatic Transmission, Selector Lever Positions (With Code (428a)) Steering Wheel Shift Buttons
The selector lever can be moved into 6 different positions. The driver can select 3 different transmission modes using the transmission mode switch (S16/5).
The selector lever positions have the following meanings:
- P
Park Lock And Start Position - R
Reverse Gear - N
Neutral (no power is transmitted. The vehicle is not in gear). - D
D all 5 forward gears are available.
Touch Function
Program "C" or "S":
- "+"
- Touch
Upshift by one shift range in each case. - Press And Hold Down
Change from the current shift range direct to "D".
- Touch
- "-"
- Touch
Downshift by one shift range in each case. - Press And Hold Down
The transmission is shifted into a gear from which the vehicle can be easily accelerated or decelerated (shift range displayed in instrument cluster (A1)).
- Touch
Transmission Mode Switch Programs (S16/5)
Sport program "S":
- Starting off in 1st gear for all driving situations.
Comfort program "C":
- Starting off always in 2nd gear (except in 1st gear range).
- The maximum speed is not utilized in any one gear.
NOTE:
When kickdown is operated the upshifts and downshifts take place as in the sport program "S".
Manual program "M":
- Direct gear selection by means of the selector lever on the electronic selector lever module control unit (N15/5) possible by means of the left steering wheel gear shifter (S110/2) or right steering wheel gear shifter (S111/2).
Program "M":
- "+"
- Touch
Upshift by one gear in each case. The selected gear is only engaged at the permitted rotational speed. - Press And Hold Down
Change from the current shift range direct to "D".
- Touch
- "-"
- Touch
Shift down one gear each time. The selected gear is only engaged at the permitted rotational speed. - Press And Hold Down
The transmission is shifted into a gear from which the vehicle can be easily accelerated or decelerated (shift range displayed in instrument cluster (A1)).
- Touch
NOTE:
If the shift range is limited, the transmission shifts up gears when the engine speed is close to the engine break away speed.