Shift Pattern Display, Function (Transmission 722.6 In Model 209.376 As Of 06/01/03, 209.476, 211.076 As Of 09/01/03, 211.276, 215.374/379, 219.376, 220.074/174/179, 230.474 As Of 09/01/03, 230.479) (Transmission 722.6 In Model 209, 211, 230 With Code (428) Steering Wheel Shift Buttons

The position indicator in the instrument cluster (A1) is actuated by the ETC (EGS) control unit (N15/3) via the Controller Area Network bus class C (engine compartment) (CAN-C).

The program indicator in the instrument cluster (A1) is actuated by the electronic selector lever module control unit (N15/5) likewise via CAN-C.

The selector scheme symbols (87) are illuminated when the driving lamps are switched on. See Figure.

Program Selection "C/S" 

The program selection performed at the transmission mode switch (S16/5) remains stored after a driving time of approximately one minute and is then displayed once the engine is started again. The driving time of approximately one minute is necessary because of the system.

Program Selection "M" 

The program selection "M" (Manual program) performed at the transmission mode switch (S16/5) does not remain stored. The sport program "S" is displayed once the engine is started.