LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2004 >> E500 Base >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Complete Transmission - E500 - 722.633 >> Complete Transmission >> Overview Of Automatic Transmission (At) System Components, Location/Task/Design/Function (722.6 In Models 211 Up To 05/31/04) >> Electric Control Module, Location/Task/Design/Function >> Electric Control Module, Design
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electric Control Module, Design

Structure 

The electrical control unit (Y3/6) consists of a supporting body made from plastic, in which the electrical components - RPM sensors 2 and 3 (Y3/6n2, Y3/6n3), the regulating solenoid valves (Y3/6y1, Y3/6y2), the shift solenoid valves (Y3/6y3, Y3/6y4, Y3/6y5), the PWM convertor lockup solenoid valve (Y3/6y6), the starter lockout contact (Y3/6s1) and transmission oil temperature sensor (Y3/6b1) - are combined. See Figure.

Conductor track integrated into the shell connect the electric components to a plug connection (11).

The connection to the wiring harness on the vehicle side and the ETC control module (N15/3) is made via this 13-pin connector (11) with a bayonet lock.

With the exception of the solenoid valves, all other electric components are fixed to the conductor tracks.

scientia non olet · About LEMON Manuals