Error Message "Component SBC Temperature Too Low" When Programming The; SBC Control Unit (42.46/69)

Publication date: 2006-02-10
Reference number: 42.46/69

ERROR MESSAGE "COMPONENT SBC TEMPERATURE TOO LOW" WHEN PROGRAMMING THE; SBC CONTROL UNIT

TECHNICAL SERVICE BULLETIN

Reference Number(s): P-B-42.46/69, Date of Issue: February 10, 2006

MERCEDES-BENZ:	Model 211.026/056/065/070/076/082/083/087/256/265/282/283/287; Model 219.375/376; Model 230.474/475/476/479; Model Year 2005 - 2006
GROUP:	42 - Brakes

SUBJECT

Model 211.026/056/065/070/076/082/083/087/256/265/282/283/287

Model 219.375/376

Model 230.474/475/476/479

Model Year 2005 - 2006

Error Message "Component SBC Temperature Too Low" When Programming the SBC Control Unit

SERVICE INFORMATION

In the above model vehicles, if you encounter STAR Diagnosis displaying the following error message "Component SBC Temperature too Low" during programming of the SBC Control Unit, please perform the following to resolve.

NOTE: Due to a parameterization error in STAR Diagnosis and the SBC control unit, the above listed error message and an erroneous temperature value for the SBC control unit of -50°C can be displayed.

Press the F1 key to return to the introductory screen for SBC programming
Switch the ignition Off
Wait 5 seconds
Switch the ignition On
Press the F2 key
The SBC programming will now be continued

NOTE: The programming error only affects vehicles as of model year code 805. Reference DTB P-B-00.19/79 for details on determining model year code.