Seat adjustment collision avoidance, function - GF91.29-P-2010R
MODEL 230
Function requirement:
- Normalizing performed
A collision of the seat cushion frame with the adjuster, the center console, the B-pillar or the roof is avoided by means of stored maps in the
- left front seat adjustment with memory control module (N32/1) and
- right front seat adjustment with memory control module (N32/2)
The following collision situations during adjustment of the seat may occur,
depending on the position of the seat at that moment:
| Collision possibilities | Actuation 1 | Actuation 2 |
|---|---|---|
| Cushion frame/ Seat adjuster | Seat cushion angle down | Seat height adjustment down |
| Center console/ Seat cushion | Seat lengthwise adjustment forward | Seat cushion adjustment forward |
| B-pillar Backrest motor | Seat forward/back adjustment to rear | Height adjustment down |
| Roof/Head restraint | (Backrest adjustment vertical) | Head restraint up |
| Seat calibration function | GF91.29-P-3005R | ||
| Left front seat adjustment control module with memory location/task | GF91.29-P-2106R | ||
| Right front seat adjustment control module with memory location/task | GF91.29-P-2107R |