ME-SFI driving mode, function - GF07.61-P-2005MAS
ENGINE 156.984 in MODEL 216.377, 221.077 /177 as of Model Year 2009 /AEJ 08
Function requirements for driving mode, general points
- Circuit 87M ON (engine control ON)
- Engine running
Driving mode, general points
The following partial functions are active in driving mode and are described in the following documents:
- ME fuel supply, function
- ME injection regulation, function
- Motor electronics (ME) ignition system, function
- ME Start, post-start phase and warm-up enrichment, function
- ME-SFI alternator interface function
- ME engine speed signal, function
- ME-SFI maximum engine speed limitation, function
- ME-SFI limiting maximum vehicle speed, function
- ME-SFI safety fuel shutoff, function
- Intake manifold switchover, function
- ME-SFI lambda control, function
- ME-SFI two-sensor control, function
- ME oxygen sensor heater, function
- Self-adjustment of mixture formation, function
- Smooth engine running analysis, function
- ME thermal management, function
- ME engine torque requests, function
- ME-SFI overrun fuel shutoff, function
- Camshaft adjustment, function
- ME knock control, function
- Overheating/pinging protection, function
- Air injection, function
- ME-SFI electronic accelerator, function
- Electronic accelerator pedal emergency running mode, function
- Purge function
- Monitoring catalytic converter efficiency, function
| ME-SFI fuel supply function | GF07.61-P-3004MAS | ||
| ME-SFI injection regulation function | GF07.61-P-3002MAS | ||
| Motor electronics (ME-SFI) ignition system function | GF07.61-P-3008MAS | ||
| ME-SFI Start, post-start phase and warm-up enrichment function | GF07.61-P-3014MAS | ||
| ME-SFI alternator interface function | GF07.61-P-3003MAS | ||
| ME-SFI engine speed signal function | GF07.61-P-3017MAS | ||
| ME-SFI maximum engine speed limitation function | GF07.61-P-3007MAS | ||
| ME-SFI maximum speed limit function | GF07.61-P-3019MAS | ||
| ME-SFI safety fuel shutoff function | GF07.61-P-3018MAS | ||
| Intake manifold switchover function | GF07.61-P-3028MAS | ||
| ME-SFI lambda control function | GF07.61-P-4022MAS | ||
| ME-SFI two-sensor control function | GF07.61-P-3020MAS | ||
| ME-SFI oxygen sensor heater function | GF07.61-P-3024MAS | ||
| Self-adjustment of mixture formation, function | GF07.10-P-1029MAS | ||
| Smooth engine running analysis function | GF07.10-P-1030MAS | ||
| ME-SFI thermal management function | GF07.61-P-4012MAS | ||
| ME-SFI engine torque requests function | GF07.61-P-4013MAS | ||
| ME-SFI overrun fuel shutoff function | GF07.61-P-4019MAS | ||
| Camshaft adjustment function | GF07.61-P-4021MAS | ||
| ME-SFI knock control function | GF07.61-P-4031MAS | ||
| Overheating/pinging protection function | GF07.61-P-4027MAS | ||
| Air injection function | GF14.30-P-3012MAS | ||
| ME-SFI electronic accelerator function | GF30.20-P-3012MAS | ||
| Electronic accelerator pedal emergency running mode, function | GF30.20-P-4026MAS | ||
| Purge function | GF47.30-P-3015MAS | ||
| Monitoring catalytic converter efficiency, function | GF49.10-P-3033MAS |