E-CALL pushbutton switch, location/task/design/function - GF82.95-P-4201R: Notes

MODEL 230 with CODE (349) E-Call emergency call system with CODE (498) Japan version

MODEL 230 up to 30.6.04 with CODE (494) USA version with CODE (349) E-Call emergency call system

EMERGENCY CALL pushbutton switch, location		GF82.95-P-4201-01R
E-Call pushbutton switch, task	Actuation of a manual EMERGENCY CALL Signaling of EMERGENCY CALL operating conditions through two installed LEDs.
E-Call pushbutton switch, design	Integrated LED to night illumination (circuit 58d) Two integrated LEDs as an operating condition display Cap for protection against unintended actuation Parallel to the switch contact a horizontal "sense" resistor (pushbutton switch status for E-call self-diagnosis)
E-call pushbutton switch, function	When actuating the emergency call system pushbutton switch (S93/3) the "sense" resistor (pushbutton switch status for E-call self-diagnosis) is bridged by the switch contact. This is recognized by the emergency call system control unit (EMERGENCY CALL, A35/8) whereupon an EMERGENCY CALL is then triggered.