LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2011 >> ML450 >> Repair and Diagnosis >> Quick Lookups >> Technical Bulletins >> Campaigns >> Accessories Control Systems >> Service Campaign 2010090007 - Update Software For The Power Electronics Control Module (2010090007)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Campaign 2010090007 - Update Software For The Power Electronics Control Module (2010090007)

Publication date: 2010-10-08
Reference number: 2010090007

SERVICE CAMPAIGN 2010090007 - UPDATE SOFTWARE FOR THE POWER ELECTRONICS CONTROL MODULE

SERVICE CAMPAIGN 2010090007 - UPDATE SOFTWARE FOR THE POWER ELECTRONICS CONTROL MODULE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 2010090007, Date of Issue:  October 2010
MERCEDES-BENZ: Model 164.195, Model Years 2010-2011
GROUP: 00 OF SERVICE INFORMATION BINDER
GROUP: I OF INFORMATION _ PARTS & ACCESSORIES BINDER

SUBJECT

Model 164.195, Model Years 2010-2011 

Update Software for the Power Electronics Control Module 

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the software for the Power Electronics Control Module may not meet current specifications. Dealers will update the software for the Power Electronics Control Module at the next workshop visit.

Prior to performing this Service Campaign:

Please note that Recall and Service Campaigns do not expire  and may also be performed on a vehicle with a vehicle status indicator.

Approximately 868 vehicles are affected.

PROCEDURE

NOTE:
  • Use DAS/Xentry 07/2010 with all associated patches or higher.
  • Follow the steps exactly as described in DAS/Xentry.
  • Connect battery charger.
  1. Connect Star Diagnosis to vehicle.
  2. Install software for power electronics control unit: Control units/Drive/Power electronics/Control unit adaptations/Control unit programming".
  3. Follow on-screen instructions.
    NOTE: Perform service work on other vehicles while the software for the power electronics control module is being updated.

The following allowable labor operation should be used when submitting a warranty claim for this repair:

WARRANTY INFORMATION

Operation:

  1. Star Diagnosis System (SDS), Connect/disconnect (02-4762)
  2. Install software for power electronics control module (with DAS connected) (02-6951)
  3. Connect/disconnect battery charger (02-5058)
WARRANTY INFORMATION

Damage Code Operation Number Labor Time (hrs.) Model Indicator(s)
04 901 01 8 02-4762 0.2 Z8
02-6951 0.1
02-5058 0.1