LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2012 >> CL63 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Manual TPMS Restart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Manual TPMS Restart

NOTE: After wheel rotation or sensor replacement, the vehicle must be parked for 20 minutes before attempting to restart the TPM system.
NOTE: Manual TPMS restart is accomplished by using the multifunction display control buttons on the steering wheel.
NOTE: When the TPM system is restarted, the tire pressures set by the driver are adopted by the tire pressure monitoring control unit as the new specified values.
  1. Switch ignition to ON.
  2. Use the right or left arrow multifunction display buttons to access the "Service" menu.
  3. Use the up or down arrow menu control buttons to access the "Tire Pressure" menu.
  4. Press "OK".
  5. You will see, in the multifunction display, either:
    • The current inflation pressures for each tire, or
    • The message: "Use current pressure values as new reference values. To confirm press "OK".
  6. Press "OK". The message "Tire pressure monitor restarted" should be displayed.
  7. After 10 minutes of driving, the current tire inflation pressure values are accepted as reference values.
scientia non olet · About LEMON Manuals