Signal List For Working Functions, PSM, Function - GF54.21-D-3035P
MODEL 906 with CODE ED5 (Parameterizable special module (PSM)) with CODE XM0 (Facelift) Working speed control
MODEL 906 with CODE ED5 (Parameterizable special module (PSM)) with CODE XM0 (Facelift) Speed limit (GB)
MODEL 906 with CODE ED5 (Parameterizable special module (PSM)) with CODE XM0 (Facelift) Engine start/stop (MSS)
MODEL 906 with CODE ED5 (Parameterizable special module (PSM)) with CODE XM0 (Facelift) Power take-off (PTO)
MODEL 906 with CODE ED8 (Preinstallation for parameterizable special module (PSM)) with CODE XM0 (Facelift) Working speed control
MODEL 906 with CODE ED8 (Preinstallation for parameterizable special module (PSM)) with CODE XM0 (Facelift) Speed limit (GB)
MODEL 906 with CODE ED8 (Preinstallation for parameterizable special module (PSM)) with CODE XM0 (Facelift) Engine start/stop (MSS)
MODEL 906 with CODE ED8 (Preinstallation for parameterizable special module (PSM)) with CODE XM0 (Facelift) Power take-off (PTO)
| Signal name | Signal ID | Signal type | Signal default/comment |
|---|---|---|---|
| Lockout of accelerator pedal (module "Working speed control") | 10E8 | Bit | 0 |
| Enabling of working speed control | 10E9 | Bit | 0 |
| Switch "Rpm change" OPERATED (module "Rpm change") | 10EA | Bit | 0 |
| Enabling of fixed speed | 10EB | Bit | 0 |
| Status of solenoid valve actuation (module "Power take-off") | 10EC | Bit | 0 |
| Ramp mode ACTIVE (otherwise pulse mode) | 10F0 | Bit | 0 |
| Current maximum speed ("rpm limit" module) | 2026 | Byte | 0 Value range/conversion 0... 254 = 254 km/h |
| Specified value of rpm (module "Rpm change") | 300C | Word | 0 Value range/conversion of rpm specified value which is output via Controller Area Network bus class B (interior CAN B) |
| Current maximum rpm limit ("rpm limit" module) | 300D | Word | 0 Value range/conversion 0... 8000 = 8000 rpm |
| Current minimum rpm limit ("rpm limit" module) | 300E | Word | 0 Value range/conversion 0... 8000 = 8000 rpm |
| Current maximum torque ("rpm limit" module) | 300F | Word | 0 Value range/conversion 0... 254 = 254 Nm |
| Specified value of rpm (module "Fixed speed") | 3010 | Word | 0 Value range/conversion 0... 8000 = 8000 rpm |
| Specified value of rpm (module "Hand throttle actuator") | 3011 | Word | 0 Value range/conversion 0... 8000 = 8000 rpm |
| Signal name | Signal ID | Signal type | Signal default/comment |
|---|---|---|---|
| Request for working speed control (module "Power take-off") | 10ED | Bit | 0 |
| Switch on indicator lamp (module "Power take-off") | 10EE | Bit | 0 |
| Actuate solenoid valve for power take-off (module "Power take-off") | 10Ef | Bit | 0 |
| Power take-off ENGAGED | 1241 | Bit | 0 |
| Signal name | Signal ID | Signal type | Signal default/comment |
|---|---|---|---|
| Signal "Engine start" | 10F6 | Bit | 0 |
| Signal "Engine stop" | 10F7 | Bit | 0 |
| Signal name | Signal ID | Signal type | Signal default/comment |
|---|---|---|---|
| Speed limit | 2028 | Byte | 0 Value range/conversion 0... 254 = 254 km/h |
| Parameterizable special module (PSM) control unit component description | GF54.21-D-5005P |