LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2015 >> ML350 Base >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Monitor System Reactivation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tire Pressure Monitor System Reactivation

CAUTION: The warning system can only operate in a reliable manner if correct tire pressures are set. If an incorrect tire inflation pressure is set, the system will monitor the pressure according to the incorrect value.
NOTE: TPMS activation is accomplished by using the multifunction display control buttons on left side of steering wheel.
  1. Turn ignition switch to OFF position.
  2. Ensure inflation pressure of all 4 tires is set to specification.
  3. Make sure that the SmartKey is in position 2 in the ignition lock.
  4. Press the left or right arrow button to select the SERV. menu.
  5. Press the up or down arrow button to select the TIRE PRESSURE.
  6. Press the OK button. The multifunction display shows the current tire pressure of the individual tires, or the message TIRE PRESSURE WILL BE DISPLAYED AFTER DRIVING A FEW MINUTES.
  7. Press the down arrow button. The message USE CURRENT PRESSURES AS NEW REFERENCE VALUES will appear.
  8. Press the OK button. The message TIRE PRESS. MONITOR RESTARTED will appear.
  9. After driving for a few minutes, the system checks whether the current tire pressures are within the specified range. The new tire pressures are then accepted as reference values and monitored.
scientia non olet · About LEMON Manuals