LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2017 >> GLC300 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Central Locking System - 253 Chassis >> Basic Knowledge >> Component Description For Keyless-Go Control Unit >> Component Description For Keyless-Go Control Unit - GF80.61-P-4204RFM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Description For Keyless-Go Control Unit - GF80.61-P-4204RFM

Model 205 

as of model year 2019 

Model 253 (except 253.99) 

as of model year 2020 

Model 253.99 

Shown: Model 205.0 

G12941250Courtesy of MERCEDES-BENZ USA

Shown on model 253 

Fig 1: Keyless-Go Control Unit Component Location - Model 253 As Of Model Year 2020
G12941251Courtesy of MERCEDES-BENZ USA

Location 

The KEYLESS-GO control unit is located on the right in the trunk under the cover (model 205) and/or on the left in the trunk behind the side trim (model 253).

Tasks 

The KEYLESS-GO control unit has the following purposes:

Reading in of sensors 

The input factors are read in via the following connections:

Direct line 

The signals from the following components are read via direct lines:

KEYLESS-GO LIN (with CODE 871 (HANDS-FREE ACCESS)) 

The signals from the rear switching module (N38) are read in by the KEYLESS-GO LIN.

Interior CAN 

The signals are read in by the KEYLESS-GO control unit via the interior CAN.

Evaluation of input factors 

The input factors that have been read in are evaluated by the integrated microprocessor and the relevant components are then actuated.

Actuation of components 

The following components are actuated via direct lines:

  Wiring diagram for KEYLESS-GO control unit Model 253 (except 253.99) as of model year 2020; model 253.99 PE80.61-P-2101-97FCA 
    Model 205 as of model year 2019 Control unit N69/5 PE80.61-P-2101-97FBB