Remove/Install Injection System Control Unit - AR07.08-P-7008MMV
Engine 276.8 in Model 205
Engine 276.8 in Model 253
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove | |||
| 1 |
Read out and save variant coding of the ME-SFI [ME] control unit (N3/10) using the diagnostic system | When replacing the ME-SFI [ME] control unit (N3/10). | AD00.00-P-2000-04B |
| 2 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
| 3 | Remove upper engine cover | ||
| 4 | Release and disconnect electrical connections (1, 2) on ME-SFI control unit (N3/10) | ||
| 5 | Unclip ME-SFI [ME] control unit (N3/10) upwards and take it off | ||
| 6 | Remove mount from ME-SFI [ME] control unit (N3/10) | When replacing the ME-SFI [ME] control unit (N3/10). | |
| Install | |||
| 7 | Attach mount to ME-SFI [ME] control unit (N3/10) | When replacing the ME-SFI [ME] control unit (N3/10). | |
| 8 | Insert ME-SFI [ME] control unit (N3/10) with mount into the bracket | ||
| 9 | Place electrical connections (1, 2) and lock | ||
| 10 | Install upper engine cover | ||
| 11 | Switch on ignition | When replacing the ME-SFI [ME] control unit (N3/10). | |
| 12 |
Transfer stored data to new ME-SFI [ME] control unit (N3/10) | When replacing the ME-SFI [ME] control unit (N3/10). | AD00.00-P-2000-04B |
| 13 |
Release transport protection on ME-SFI [ME] control unit (N3/10) using the diagnostic system | When replacing the ME-SFI [ME] control unit (N3/10). | AD00.00-P-2000-04B |
| 14 |
Personalize and activate ME-SFI [ME] control unit (N3/10) using the diagnostic system | When replacing the ME-SFI [ME] control unit (N3/10). | AD00.00-P-2000-04B |
| Risk of accident from Vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure Vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
15 |
Perform an engine test run and check engine for proper function |