Supplemental Restraint System Control Unit, Component Description - GF91.60-P-4080GR

MODEL 166 up to model year 2016

Shows model 166.0

Location

The supplemental restraint system control unit is located on the transmission tunnel.

Task

The supplemental restraint system control unit has the following tasks:

Reading in of sensors and signals
Evaluation of input factors
Actuation of components

MODEL 166 as of 7/1/14

up to model year 2016

with CODE 494 (US version)

An accident data recorder is integrated in the supplemental restraint system control unit, which records relevant data before, during and after an accident. The data stored can be used to trace back the course of the accident.

Reading in of sensors and signals

The input factors are read in via the following connections:

Direct line
Seat occupancy LIN (LIN E2) (with CODE U10 (Front passenger seat with weight recognition) or CODE U18 (Automatic child seat recognition (ACSR)))
Chassis CAN 1 (CAN E1)

Direct line

The signals from the following sensors are read via direct lines:

Front passenger seat occupancy recognition (B41/1) (except CODE U10 (Front passenger seat with weight recognition) and except CODE U18 (Automatic child seat recognition (ACSR)))
Left frontal acceleration sensor (B48/1)
Right frontal acceleration sensor (B48/2)
Left front door pressure sensor (B48/7)
Right front door pressure sensor (B48/8)
Left rear door pressure sensor (B48/9)
Right rear door pressure sensor (B48/10)
Left B-pillar body acceleration sensor (B48/15)
Right B-pillar body acceleration sensor (B48/16)
Left front bumper pedestrian protection sensor (B151/1) (with CODE U60 (Pedestrian protection))
Center front bumper pedestrian protection sensor (B151/2) (with CODE U60 (Pedestrian protection))
Right front bumper pedestrian protection sensor (B151/3) (with CODE U60 (Pedestrian protection))
Driver belt buckle restraint system switch (S68/3)
Front passenger belt buckle restraint system switch (S68/4)
Front passenger seat position detection switch (S68/20) (with CODE 494 (USA version))

Seat occupancy LIN (with CODE U10 (Front passenger seat with weight recognition) or CODE U18 (Automatic child seat recognition (ACSR)))

The front passenger seat occupancy status is transmitted by the weight sensing system (WSS) control unit (N110) (with CODE U10 (Front passenger seat with weight recognition)) or by the front passenger seat occupied recognition and ACSR (B48) (with CODE U18 (Automatic child seat recognition (ACSR))) via the seat occupancy LIN to the supplemental restraint system control unit.

Chassis CAN 1

The following signals, among other things, are read in via chassis CAN 1:

Terminal status of terminal 15
Status of the central locking (CL)

The functions that use these signals are described in the individual function descriptions (see appropriate block diagram or function schematic).

Evaluation of input factors

The input factors that have been read in are evaluated by the integrated microprocessor and the relevant components are then actuated.

Actuation of components

The actuation of the components takes place via the following connections:

Direct line
Chassis CAN 1

Direct line

The following components are actuated via direct lines:

Pyrofuse (F32/3f88)
Driver emergency tensioning retractor squib (R12/1)
Passenger emergency tensioning retractor squib (R12/2)
Front passenger airbag squib 1 (R12/4)
Front passenger airbag squib 2 (R12/5)
Left 2nd seat row emergency tensioning retractor squib (R12/6)
Right 2nd seat row emergency tensioning retractor squib (R12/7)
Driver sidebag squib (R12/9)
Front passenger sidebag squib (R12/10)
Left rear sidebag squib (R12/11) (with CODE 293 (Left and right rear sidebag))
Right rear sidebag squib (R12/12) (with CODE 293 (Left and right rear sidebag))
Driver airbag squib 1 (R12/13)
Driver airbag squib 2 (R12/14)
Left windowbag squib (R12/22)
Right windowbag squib (R12/23)
Driver kneebag squib (R12/25)
Left 3rd seat row emergency tensioning retractor squib (R12/35) (model 166.0 with CODE 847 (3rd seat row) or model 166.8)
Right 3rd seat row emergency tensioning retractor squib (R12/36) (model 166.0 with CODE 847 (3rd seat row) or model 166.8)
Driver anchor fitting tensioner squib (R12/37) (with CODE 494 (USA version))
Front passenger anchor fitting tensioner squib (R12/38) (with CODE 494 (USA version))
Left rear active engine hood squib (R12/49) (with CODE U60 (Pedestrian protection))
Right rear active engine hood squib (R12/50) (with CODE U60 (Pedestrian protection))
Analog crash output to CDI control unit (N3/9) (diesel engine) or ME-SFI control unit (N3/10) (gasoline engine)
Analog crash output to SAM control unit (N10)
Digital crash output to emergency call system control unit (N123/4) (with CODE 359 (TELEAID emergency call system) or CODE 348 (Emergency call/assist system))

Chassis CAN 1

The following signals, among other things, are sent via chassis CAN 1:

Crash signal
Display fault messages request
Driver belt buckle restraint system switch status
Front passenger belt buckle restraint system switch status

The functions that use these signals are described in the individual function descriptions (see appropriate block diagram or function schematic).

	Wiring diagram for supplemental restraint system control unit	MODEL 166 up to model year 2016 Sheet 1	PE91.60-P-2106-97NAA
		MODEL 166 up to model year 2016 Sheet 2	PE91.60-P-2106-97NAB