Table Of Contents For Function Description Of Gasoline Injection And Ignition System With Direct Injection - GF07.70-P-0998MMG
ENGINE 276.8/9 in MODEL 166 up to model year 2016
| Gasoline injection and ignition system with direct injection, function | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF07.70-P-0002MMG | |
| ENGINE 276.8 in MODEL 166 up to model year 2016 | GF07.70-P-0002MMU | ||
| Ignition ON, function | GF07.10-P-1000MMG | ||
| Starting, function | GF07.10-P-1001MMG | ||
| Ignition OFF, function | GF07.10-P-1002MMG | ||
| Fuel supply, function | GF07.10-P-1003MMG | ||
| Injection regulation, function | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF07.10-P-1004MMG | |
| ENGINE 276.8 in MODEL 166 up to model year 2016 | GF07.10-P-1004MMU | ||
| Ignition system function | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF07.10-P-1005MMG | |
| ENGINE 276.8 in MODEL 166 up to model year 2016 | GF07.10-P-1005MMU | ||
| Synchronize fuel injection and firing order function | GF07.10-P-1006MMG | ||
| Start, post-start phase and warm-up enrichment, function | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF07.10-P-1007MMG | |
| ENGINE 276.8 in MODEL 166 up to model year 2016 | GF07.10-P-1007MMU | ||
| Rpm control, function | GF07.10-P-1008MMG | ||
| Alternator interface function | GF07.10-P-1009MMG | ||
| Lambda control, function | GF07.10-P-1010MMG | ||
| Smooth running control, function | GF07.10-P-1011MMG | ||
| Thermal management, function | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF07.10-P-1012MMG | |
| ENGINE 276.8 in MODEL 166 up to model year 2016 | GF07.10-P-1012MMU | ||
| Torque coordination, function | GF07.10-P-1013MMG | ||
| Deceleration fuel shutoff, function | GF07.10-P-1014MMG | ||
| Knock control, function | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF07.10-P-1015MMG | |
| ENGINE 276.8 in MODEL 166 up to model year 2016 | GF07.10-P-1015MMU | ||
| Camshaft adjustment, function | GF07.10-P-1016MMG | ||
| Intake manifold switchover, function | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF07.10-P-1017MMG | |
| Engine limp-home mode, function | GF07.10-P-1019MMG | ||
| On-board diagnosis, function | GF07.10-P-1020MMG | ||
| Engine timing start-stop function | ENGINE 276.9 in MODEL 166 up to model year 2016 with CODE B03 (ECO start/stop function) The ECO start/stop function is seen from the point of view of the engine management. Information for the partial function "ECO start/stop function energy management" is documented in the function description "Energy management function". | GF07.10-P-1041MMG | |
| ENGINE 276.8 in MODEL 166 up to model year 2016 with CODE B03 (ECO start/stop function) | GF07.10-P-1041MMR | ||
| Charging, function | ENGINE 276.8 in MODEL 166 up to model year 2016 | GF09.00-P-2000MMU | |
| Exhaust treatment function | GF14.00-P-3000MMG | ||
| Exhaust gas recirculation, function | ENGINE 276.9 in MODEL 166 up to model year 2016 with CODE 920 (Direct petrol injection with stratified charging) | GF14.20-P-3000MMG | |
| Electronic accelerator function | GF30.20-P-3015MMG | ||
| On-board refueling vapor recovery function | ENGINE 276.8/9 in MODEL 166 up to model year 2016 with CODE 494 (US version) | GF47.10-P-3004MMG | |
| Purging function | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF47.30-P-3015MMG | |
| Purging system with leak test function | ENGINE 276.9 in MODEL 166 up to model year 2016 with CODE 494 (US version) | GF47.30-P-3016MMG | |
| Overview of system components for gasoline injection and ignition system with direct injection | ENGINE 276.9 in MODEL 166 up to model year 2016 | GF07.70-P-9998MMG | |
| ENGINE 276.8 in MODEL 166 up to model year 2016 | GF07.70-P-9998MMU |