Remove And Install Coolant Temperature Sensor - Ar07.04-D-1620WE
ENGINES 651.955/956/957 in MODEL 906
| Remove/install | |||
| - | Risk of injury
to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant. |
Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. Wear protective gloves, protective clothing and safety glasses. |
AS20.00-Z-0001-01A |
| 1 | Drain coolant | - | AR20.00-D-1140SD |
| 2 | Remove engine trim panel | - | AR01.10-D-2405WE |
| 3 | Disconnect electrical connector at coolant temperature sensor (B11/17) | - | - |
| 4 | Pull out securing clamp (1) | - | |
| 5 | Remove coolant temperature sensor (B11/17) | - | |
| 6 | Install in the reverse order | ||
| Checking | |||
| 7 | Inspecting cooling system for leaks | - | AR20.00-S-1010S |