LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2017 >> Sprinter 3500 Van Cargo Extended, RWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Mixture Formation - Description & Operation, General Information, Basic Knowledge, Safety Precautions, Testing & Repair, Test & Adjustment Values - Model 906 (Engine 651) >> Basic Knowledge >> Component Description For Temperature Sensor Upstream Of Turbocharger - GF07.04-D-6109HD
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Description For Temperature Sensor Upstream Of Turbocharger - GF07.04-D-6109HD

ENGINES 651.955/957 in MODEL 906 

with CODE (XZ1) Model generation 1 

with CODE (MZ0) Blue EFFICIENCY 

Location 

Shown on engine 651.955 

The temperature sensor upstream of the turbocharger is located on the exhaust manifold flange upstream of the turbocharger.

G13186424Courtesy of MERCEDES-BENZ USA

Task 

The temperature sensor upstream of turbocharger determines the exhaust gas temperature upstream of the turbocharger.

IMPORTANT The determined exhaust gas temperature is used by the CDI control unit (N3/28) to protect the engine and diesel particulate filter (DPF) against thermal overloading.

Input and output signals 

Direct output signals 

Design 

The temperature sensor upstream of turbocharger consists of a metallic housing with a resistor with positive temperature coefficients (PTC).

Function 

The integral PTC resistor in temperature sensor upstream of turbocharger changes its electrical resistance according to the exhaust gas temperature. The change in resistance results in a voltage which is used by the CDI control unit to compute the exhaust temperature upstream of the DPF.

IMPORTANT The electrical resistance increases for a PTC resistor as the temperature increases.