Remove/Install Charge Air Temperature Sensor - Ar07.52-D-1466WE
ENGINES 651.955/956/957 in MODEL 906
| Remove/install | |||
| 1 | Lift/jack up vehicle | - | AR00.60-D-1000H |
| 2 | Disconnect electrical connector (1) at charge air temperature sensor (B17/13) | - | - |
| 3 | Unclip charge air temperature sensor (B17/13) on charge air duct (2) (arrows) and remove | - | |
| 4 | Install in the reverse order | ||
| - | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. |
AS00.00-Z-0005-01A |
| 5 | Perform engine test run and check engine in the area of the charge air temperature sensor (B17/13) for leaks | - | - |