Remove/Install Front Seat Frame - Ar91.10-D-5319TSE

Model 907 

with code SF1 (Driver's seat electrically adjustable) 

Model 907 

with code SF2 (Electrically adjustable co-driver's seat) 

Shown with code SF1 (Electrically adjustable driver's seat), code h16 (Seat heating for driver) and code Sh1 (Driver thorax/pelvis side airbag) 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Remove front seat.		AR91.10-D-1000TS
2	Remove seat backrest frame from front seat.		AR91.10-D-5318TSE
3	Remove seat cushion padding from front seat.	Model 907 except code h15 (Seat heating for front passenger) except code h16 (Seat heating for driver)	AR91.10-D-5040TS
		Model 907 with code h15 (Seat heater for front passenger) Model 907 with code h16 (Seat heater for driver)	AR91.10-D-5040TSH
4	Remove seat occupancy recognition from front passenger seat.	Model 907 with code J55 (Seat belt warning system for front passenger seat)	AR91.60-D-0008TS
5	Remove front seat control unit.		AR91.29-D-1550TS
6	Disconnect electrical connectors (1, 2, 3).	To do so, release electrical connectors (1, 2, 3).
7	Remove electrical wiring harness (8) from seat frame base (10).	Note installation position of electrical wiring harness (8). Otherwise, the electrical wiring harness (8) may be damaged. Remove retaining clip (9) depending on equipment installed. Check retaining clips (9) for damage. Clip remover If the retaining clips (9) are damaged, replace the retaining clips (9).	Fig 1
8	Remove seat frame base (10).	The seat frame base (10), seat frame and seat adjustment unit cannot be disassembled. To do so, release the catch hooks (5, 7) on the electrical connectors (4, 6).
9	Install in the reverse order
	Check
10	Perform function check of front seat.

Fig 1: Clip Remover (452 589 01 63 00)