Remove/Install Outer Trim On Seat Frame - Ar91.10-D-1201TS

Model 907 

except code SF1 (Driver's seat electrically adjustable) 

except code SF2 (Electrically adjustable co-driver's seat) 

except code SL1 (Co-driver's seat) 

Shown with CODE SB2 (Comfort front passenger seat) 

Shown with CODE SB2 (Comfort front passenger seat) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Adjust front seat (1) to front	Model 907.6 with code D50 (Full-width partition wall) Model 907.6 with code D51 (Full-width partition wall with 1 window) Model 907.6 with code D64 (partition wall with sliding door)
2	Move front seat (1) upward
3	Remove screw (2)
4	Remove seat belt on front seat (1)	Model 907 with code SB3 (Suspension seat comfort version, driver's seat) Model 907 with code SB4 (Suspension seat comfort version, front passenger seat)	AR91.40-D-1030-01TS
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
		Bolt, seat belt end fitting on seat frame for front seat	*BA91.40-N-1005-03TS
		Long wedge	Fig 1
5	Remove cover (5)	Removal:  Carefully release lock (8) of cover (5). Otherwise the lock (8) will be damaged. Removal  : To do so, release lock (8) using a suitable screwdriver through the bore (6) of the lever (7) and remove cover (5) upwards.
6	Remove lever (7)	Removal  : To do so, release catch hook (9) upwards using a suitable tool and move lever (7) (arrow A).
7	Remove handwheel (10)	Long wedge	Fig 1
8	Remove handwheel (11)	Model 907 except code S02 (Driver's seat) except code S04 (Front passenger seat (standard seat)) except code SB9 (Driver's Seat Plus) Long wedge	Fig 1
9	Partially remove outer cover (3) from seat frame (4)	To do so, release shackle (12) from seat frame (4) (arrow B). Then press outer trim (3) on seat frame (4) out of catch (13) (arrow C) and slide shackle (14) past seat frame (4) (arrow D).
10	Remove outer trim (3)	To do so, release locks of catch (15) (arrows E). Then slide outer trim (3) on seat frame (4) out of catch (16) (arrow F).
11	Disconnect electrical connector from backrest lumbar support push button switch	Model 907 with code SE4 (Front passenger seat lumbar support) model 907 with code SE5 (Driver seat lumbar support)	AR91.29-D-2550TS
12	Remove push button switch for backrest lumbar support	When replacing outer trim (3). Model 907 with code SE4 (Front passenger seat lumbar support) model 907 with code SE5 (Driver seat lumbar support)	AR91.29-D-2550TS
13	Remove cover (17)	Model 907 except code SB3 (Suspension seat comfort version, driver's seat) except code SB4 (Suspension seat comfort version, front passenger seat) When replacing outer trim (3) or trim (17). To do so, unclip trim (17) using long wedge and remove upwards. Long wedge	Fig 1
14	Install in the reverse order
	Check
15	Perform function check of front seat (1)	Perform function check of front seat (1) depending on the equipment.

SEAT BELT BUCKLE, SEAT BELT, SEAT BELT END FITTING, SEAT BELT HEIGHT ADJUSTER

Fig 1: Long Wedge (115 589 03 59 00)