Remove/Install Outer Trim On Seat Frame - Ar91.10-D-1201TSK

Model 907 

with code SF1 (Driver's seat electrically adjustable) 

Model 907 

with code SF2 (Electrically adjustable co-driver's seat) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Adjust front seat (1) to front	Model 907.6, with code D50 (Full-width partition wall) Model 907.6 with code D51 (Full-width partition wall with 1 window) Model 907.6 with code D64 (partition wall with sliding door)
2	Move front seat (1) upward	i
3	Remove screw (2)
4	Partially remove outer cover (3) from seat frame (4)	To do so, release shackle (5) from seat frame (4) arrow (A). Then press outer trim (3) on seat frame (4) out of catch (6) (arrow B) and route shackle (7) past the seat frame (4) (arrow C).
5	Remove outer trim (3)	To do so, release locks of catch (8) (arrows D). Then slide outer trim (3) on seat frame (4) out of catch (9) (arrow E).
6	Disconnect electrical connector from backrest lumbar support push button switch	Model 907 with code SE4 (Front passenger seat lumbar support) model 907 with code SE5 (Driver seat lumbar support)	AR91.29-D-2550TS
7	Remove push button switch for backrest lumbar support	When replacing outer trim (3). Model 907 with code SE4 (Front passenger seat lumbar support) model 907 with code SE5 (Driver seat lumbar support)	AR91.29-D-2550TS
8	Remove cover (10)	When replacing outer trim (3) or trim (10). To do so, use long wedge to unclip trim (10) and remove upwards. Long wedge	Fig 1
9	Install in the reverse order
	Check
10	Perform function check for electrical functions on front seat (1)

Fig 1: Long Wedge (115 589 03 59 00)