Remove/Install Seat Backrest Shell For Front Seat - Ar91.10-D-1916TS

Model 907 

with code Sh1 (Thorax/pelvis side-impact airbag, driver) 

Model 907 

with code SH2 (Thorax/pelvis side-impact airbag, front passenger) 

Shown on removed driver's seat with code SF1 (Electrically adjustable driver's seat) with code SZ7 (Driver seat backrest stowage net) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Adjust front seat (1) forward.	Model 907.6 with code D50 (Full-width partition wall), model 907.6 with code D51 (Full-width partition wall with 1 window)
2	Tilt seat backrest all the way forward.
3	Remove screws (3) from seat backrest shell (2).
4	Remove seat backrest shell (2).	To do so, pull seat backrest shell (2) in lower area downwards, then remove front seat (1) towards rear. Check that seat backrest shell (2) is correctly seated into place. Check catch hooks (4) and guides (5). In the case of a corresponding finding, Replace seat backrest shell (2).
5	Install in the reverse order.