Remove And Install The Electric Motor Of The Electric Step - Ar88.30-D-8505TS

Type 907 

with Code T57 (Electric step loading space sliding door on the right) 

Type 907 

with Code T58 (Electric step in the loading compartment sliding door on the left) 

Caution	Risk of injury  by cutting or scratches on sharp-edged vehicle parts	Always when working on or in the area of sharp, unburred vehicle parts Wearing safety gloves. Deburr repair panels.	AS00.00-Z-0017-01A
	Remove
1	Remove gear (2).		AR88.30-D-8506TS
2	Unscrew the screws (4).
3	Remove the holder (3).		AR88.30-D-8504TS
4	Put electrical wiring harness (5) to one side.
5	Cut the cable ties (6).
6	Detach electrical lines (7) and electrical wiring harnesses (8) from the electric motor (1).
7	Cut through electrical lines (7) (arrow A).
8	Remove the electric motor (1).
	Build in
9	Strip the ends of the electrical lines (7) remaining on the step.
10	Position the new electric motor (1).
11	Ends of the electrical lines (7) of the new electric motor (1) with the ends of the electrical lines remaining on the step Connect lines (7) with crimp connectors.	Pay attention to the color coding of the electrical lines (7). Otherwise the electric motor (1) can be damaged.
12	Position the electrical cables (7) and the electrical cable sets (8) on the new electric motor (1) and fix them with a new cable tie.
13	Position the holder (3) on the new electric motor (1) and install it.		AR88.30-D-8504TS
14	Screw in the screws (4).	Type 907 screw electric motor to holder	*BA88.30-N-1008-02TS
15	Install gear (2).		AR88.30-D-8506TS