Remove/Install Seat Belt Buckle For Front Seat - Ar91.40-D-1510TS

Model 907 

Shown with code J55 (Seat belt warning system for front passenger seat) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Move front seat (1) upwards.	Until bolt (2) on seat belt buckle (3) is accessible. If bolt (2) is not accessible. ↓ Remove trim (6) from inner seat frame.	AR91.10-D-1202TS
2	Disconnect electrical connector (4). Information on preventing damage to electronic components due to electrostatic discharge	Model 907 with code J55 (Seat belt warning system for front passenger seat) Model 907 with code J58 (Seat belt warning for driver's seat)	AH54.00-P-0001-01A
3	Remove electric line (5) from seat frame.	Model 907 with code J55 (Seat belt warning system for front passenger seat) Model 907 with code J58 (Seat belt warning for driver's seat) To do so, remove retaining clips from seat frame. : Check electrical line (5) is routed correctly. Check retaining clips for damage. Clip remover If damage is present ↓ Replace damaged retaining clips.	Fig 1
4	Remove screw/bolt (2).	Bolt, seat belt buckle to seat frame for front seat	*BA91.40-N-1001-03TS
5	Remove seat belt buckle (1).	Carefully remove seat belt buckle (1) upwards. Otherwise, the trim (6) may be damaged. Note seat belt buckle (1) installation position.
6		Install in the reverse order.
		Check
7		Carry out function check of seat belt buckle (1).

SEAT BELT BUCKLE, SEAT BELT, SEAT BELT END FITTING, SEAT BELT HEIGHT ADJUSTER

Fig 1: Clip Remover (452 589 01 63 00)