Remove/Install Bellows - Ar91.10-D-3445TS

Model 907 

with code SB3 (Suspension seat, comfort version, driver's seat) 

Model 907 

with code SB4 (Suspension seat, comfort version, co-driver's seat) 

	Remove/install
1	Remove suspension module.	Do not remove lower part of seat frame base.	AR91.10-D-0005TS
2	Remove cotter pin (1)	To do so, push boot (2) to one side.
3	Remove handwheel (3).	Detach handwheel (3) forward. The catches (4) must engage in the cutouts (5) of the trim (6). The cutout (7) must point upwards.
4	Remove trim (6).	To do so, detach trim (6) forward.
5	Remove release lever trim (8)	To do so, pull off release lever trim (8).
6	Remove nipple (9) from suspension modujg	To do so, lubricate nipple (9) using a suitable lubricant. Check nipple (9). MB multipurpose grease, 400 g If a nipple (9) is damaged. Replace boot (2).	*BR00.45-Z-1017-06A
7	Remove boot (2).	To do so, release catch hooks (10) and pass boot (2) by the suspension module starting on the left side. For this purpose use suitable tool.
8	Install in the reverse order.