Remove/Install Front Passenger Airbag - Ar91.60-D-0664TS
Model 907
| Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. |
AS91.00-Z-0008-01A | |
| Notes on carrying out repair work in the vehicle interior | AH68.00-N-0001-01S | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Detach ground line of on-board electrical system battery. | AR54.10-D-0029TS | |
| 2 | Detach ground line from additional battery. | Model 907 with code E2M (Auxiliary battery for retrofitted consumers, engine compartment) | AR54.10-D-0004TSR |
| Model 907 with code E2I (Auxiliary battery for retrofitted consumers, interior) |
AR54.10-D-0004TS | ||
| 3 | Remove lower cover on instrument panel on front passenger side. | AR68.10-D-1504TS | |
| 4 | Remove bolt (3). | ||
| 5 | Disconnect electrical connections (4). | ||
| 6 | Remove screw/bolts (2) | *BA91.60-D-1005-01TS | |
| 7 | Unclip front passenger airbag (1) from instrument panel (arrows A) and remove upward. | Clip: Unclip front passenger airbag from instrument panel and take out Use suitable protective base when unclipping. Otherwise, the instrument panel will be damaged. |
GB91.60-D-4000-01A |
| Fig 1 | |||
| 8 | Install in the reverse order. |
| Number | Designation | Model 907 | |
|---|---|---|---|
| BA91.60-D-1005-01TS | Bolt, front passenger airbag to instrument panel | Nm | 5 |