Remove/Install Front Passenger Bench Seat Backrest Padding - Ar91.10-D-1099TS
Model 907
with code S23 (Co-driver's seat double seat)
Shown with code H15 (Seat heating for front passenger)
| Notes on carrying out repair work in the vehicle interior | AH68.00-N-0001-01S | ||
| Remove | |||
| 1 | Remove head restraint guides from front passenger bench seat. | AR91.16-D-0055TS | |
| 2 | Remove front passenger bench seat. | Model 907 with code D50 (Full-width partition wall) Model 907 with code D51 (Full-width partition wall with 1 window) | AR91.10-D-1035TS |
| 3 | Remove right seat belt buckle from front passenger bench seat. | AR91.40-D-1530TS | |
| 4 | Remove seat belt end fitting from seat frame (4). | AR91.40-D-1040TS | |
| 5 | Remove rear trim of seat belt guide. | AR91.40-D-1040TS | |
| 6 | Remove trim (1). | ||
| 7 | Completely open zippers (5). | ||
| 8 | Remove seat backrest cover (3) from seat frame (4). | Fig 1 | |
| 9 | Disconnect electrical connectors (7, 8). | Model 907 with code H15 (Seat heating for front passenger) | |
| 10 | Remove front passenger bench seat side airbag. | Model 907 with code SH2 (Front passenger thorax/pelvis side airbag) | AR91.60-D-0004TS |
| 11 | Remove seat backrest padding (9) with seat backrest cover (3). | ||
| 12 | Remove seat backrest cover (3) from seat backrest padding (9). | If the seat backrest cover (3), seat backrest padding (9) or heat mat is replaced. Carefully open cushion clips (10). Damage may occur otherwise. |
Fig 2 |
| 13 | Remove cushion piece. | If the cushion piece or the seat frame (4) is replaced. | |
| Install | |||
| 14 | Install heat mat on seat backrest padding (9). | If the seat backrest padding (9) or heat mat is replaced. Model 907 with code H15 (Seat heating for front passenger) |
AR91.30-D-0008TS |
| 15 | Install cushion piece. | If the cushion piece or the seat frame (4) has been replaced. | |
| 16 | Install seat backrest cover (3) on seat backrest padding (9). | If the seat backrest cover (3), seat backrest padding (9) or heat mat has been replaced. |
Fig 2 |
| 17 | Install seat backrest padding (9) with seat backrest cover (3). | ||
| 18 | Install front passenger bench seat side airbag. | Model 907 with code SH2 (Front passenger thorax/pelvis side airbag) | AR91.60-D-0004TS |
| 19 | Connect electrical connectors (7, 8). | Model 907 with code H15 (Seat heating for front passenger) | |
| 20 | Attach seat backrest cover (3) at seat frame-* (4). | Fig 1 | |
| 21 | Close zippers (5). | ||
| 22 | Install panel (1). | ||
| 23 | Install rear trim of seat belt guide. | AR91.40-D-1040TS | |
| 24 | Attach seat belt end fitting at seat frame (4). | AR91.40-D-1040TS | |
| 25 | Install right seat belt buckle of front passenger bench seat. | AR91.40-D-1530TS | |
| 26 | Install front passenger bench seat. | Model 907 with code D50 (Full-width partition wall) Model 907 with code D51 (Full-width partition wall with 1 window) | AR91.10-D-1035TS |
| 27 | Install head restraint guides of front passenger bench seat. | AR91.16-D-0055TS |