Remove/Install Front Seat - Ar91.10-D-1000TS

Model 907 

Shown on driver's side with code SF1 (Electrically adjustable driver's seat) 

Shown on driver's side with code SR8 (Driver's seat rotating frame) and with code H16 (Seat heating for driver) 

Shown on passenger side with code SL1 (Front passenger seat) 

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Move seat backrest of front seat (1) to upright position.
2	Completely insert head restraint on front seat (1).
3	Move front seat (1) forward until screws (2) are accessible.	Model 907 with code SL1 (Co-driver's seat) To do so, operate levers (9) (arrows). Continue operating levers (9) for adjustment.
4	Remove screw/bolts (2).	Bolt, front seat to seat base	*BA91.10-N-1001-01TS
		Bolt, front seat to turn plate	*BA91.10-N-1002-01TS
5	Remove seat belt on front seat (1).	Model 907	AR91.40-D-1030-01TS
	Notes on self-locking nuts and bolts.	with code SB3 (Suspension seat, comfort version, driver's seat) Model 907 with code SB4 (Suspension seat, comfort version, co-driver's seat) Model 907 with code SL1 (Co-driver's seat)	AH00.00-N-0001-01A
		Bolt, seat belt end fitting on seat frame for front seat	*BA91.40-N-1005-03TS
		Long wedge	Fig 1
6	Move front seat (1) back until screws (3) are accessible.	Model 907 with code SL1 (Co-driver's seat) To do so, operate levers (9) (arrows). Continue operating levers (9) for adjustment.
7	Remove screw/bolts (3).	Bolt, front seat to seat base	*BA91.10-N-1001-01TS
		Bolt, front seat to turn plate	*BA91.10-N-1002-01TS
8	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
9	Detach ground line of on-board electrical system battery.	Model 907 with code SH1 (Thorax/pelvis side-impact airbag, driver) Model 907 with code SH2 (Thorax/pelvis side-impact airbag, front passenger)	AR54.10-D-0029TS
10	Disconnect ground line of auxiliary battery.	Model 907	AR54.10-D-0004TS
		with code E2I (Auxiliary battery for retrofitted consumers, interior) with code SH1 (Thorax/pelvis side-impact airbag, driver) Model 907 with code E2I (Auxiliary battery for retrofitted consumers, interior) with code SH2 (Thorax/pelvis side-impact airbag, front passenger) Model 907 with code E2M (Auxiliary battery for retrofit consumers, engine compartment) with code SH1 (Thorax/pelvis side-impact airbag, driver) except code E2I (Auxiliary battery for retrofitted consumers, interior) Model 907 with code E2M (Auxiliary battery for retrofit consumers, engine compartment) with code SH2 (Thorax/pelvis side-impact airbag, front passenger) except code E2I (Auxiliary battery for retrofitted consumers, interior)	AR54.10-D-0004TSR
11	Release and disconnect electrical connector (4).
12.1	Release and disconnect electrical connector (6).	Model 907 with code SF1 (Driver's seat electrically adjustable) Model 907 with code SF2 (Electrically adjustable co-driver's seat)
12.2	Release and disconnect electrical connector (7).	Model 907 with code H15 (Seat heater for front passenger) except code SF2 (Electrically adjustable co-driver's seat) Model 907 with code H16 (Seat heater for driver) except code SF1 (Driver's seat electrically adjustable)
13	Detach cable tie (8).	Model 907 with code H15 (Seat heater for front passenger) Model 907 with code H16 (Seat heater for driver) : Install new cable tie (8).
14	Rem ove front seat (1).	Helper required.
15	Install in the reverse order
	Check
16	Perform function check of front seat (1).	The scope of the function check varies depending on the equipment installed.

FRONT SEATS

FRONT SEATS

SEAT BELT BUCKLE, SEAT BELT, SEAT BELT END FITTING, SEAT BELT HEIGHT ADJUSTER

Fig 1: Long Wedge (115 589 03 59 00)