Remove/Install Front Seat Backrest Frame - Ar91.10-D-5318TS

Model 907 

except code SF1 (Driver's seat electrically adjustable) 

except code SF2 (Electrically adjustable co-driver's seat) 

Shown with code SB3 (Suspension seat comfort version, driver's seat), code SE5 (Driver's seat lumbar support), code Sh1 (Driver thorax/pelvis side airbag) and code S22 (Armrest for driver's seat) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Remove head restraint guides from front seat.		AR91.16-D-0051TS
2	Remove armrest.	Model 907 with code S22 (Armrest for driver's seat) model 907 with code S25 (Armrest for front passenger seat)	AR91.10-D-3326TS
3	Remove inner trim from seat frame.		AR91.10-D-1202TS
4	Remove outer trim from seat frame.	Model 907 except code SL1 (Front passenger seat)	AR91.10-D-1201TS
		Model 907 with code SL1 (Front passenger seat)	AR91.10-D-1201TSB
5	Remove seat backrest padding from front seat.	Model 907 with code Sh1 (Driver thorax-pelvis side airbag) Model 907 with code SH2 (Front passenger thorax-pelvis side airbag)	AR91.10-D-0003TS
		Model 907 except code Sh1 (Driver thorax-pelvis side airbag) except code SH2 (Front passenger thorax-pelvis side airbag)	AR91.10-D-0003TSK
6	Remove air cushion lumbar support on front seat.	Model 907 with code SE4 (Front passenger seat lumbar support) model 907 with code SE5 (Driver seat lumbar support)	AR91.25-D-1450TS
7	Remove electrical wiring harness (1).	Note position of electrical wiring harness (1). Otherwise, the electrical wiring harness (1) may be damaged.
		Remove retaining clip (2) depending on equipment installed. Check retaining clip (2) for damage. Clip remover If retaining clip (2) is damaged, replace retaining clip (2).	Fig 1
8	Remove retaining clip (3).	Model 907 with code Sh1 (Driver thorax/pelvis side airbag) or code SH2 (Front passenger thorax/pelvis side airbag) Check retaining clip (3) for damage. Clip remover If retaining clip (3) is damaged, replace retaining clip (3).	Fig 1
9	Remove seat backrest frame (4). Notes on self-locking nuts and bolts	For this purpose, remove screws (5).	AH00.00-N-0001-01A
		Screw/bolt, backrest frame to seat frame	*BA91.10-N-1005-01TS
10	Remove holder (6) from seat backrest frame (4). General information on riveting	Model 907 with code S22 (Armrest for driver's seat), model 907 with code S25 (Armrest for front passenger seat) If the seat backrest frame (4) or the holder (6) is replaced. To do this, bore out rivets (7). Commercially available devices/tools  Hand drill Hand riveter	AH60.00-P-0003-01N
11	Install in the reverse order
	Check
12	Perform function check of front seat.

FORNT SEATS

Fig 1: Clip Remover (452 589 01 63 00)