Remove/Install Front Seat Backrest Frame - Ar91.10-D-5318TSE

Model 907 

with code SF1 (Driver's seat electrically adjustable) 

Model 907 

with code SF2 (Electrically adjustable co-driver's seat) 

Shown with code SF1 (Electrically adjustable driver's seat), code SE5 (Driver's seat lumbar support), code Sh1 (Driver thorax/pelvis side airbag) and code S22 (Armrest for driver's seat) 

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Remove head restraint guides from front seat.		AR91.16-D-0051TS
2	Remove armrest.	Model 907 with code S22 (Armrest for driver's seat) model 907 with code S25 (Armrest for front passenger seat)	AR91.10-D-3326TS
3	Remove inner trim from seat frame.		AR91.10-D-1202TS
4	Remove outer trim from seat frame.		AR91.10-D-1201TSK
5	Remove seat backrest padding from front seat.	Model 907 with code Sh1 (Driver thorax-pelvis side airbag) Model 907 with code SH2 (Front passenger thorax-pelvis side airbag)	AR91.10-D-0003TS
		Model 907 except code Sh1 (Driver thorax-pelvis side airbag) except code SH2 (Front passenger thorax-pelvis side airbag)	AR91.10-D-0003TSK
6	Remove air cushion lumbar support on front seat.	Model 907 with code SE4 (Front passenger seat lumbar support) model 907 with code SE5 (Driver seat lumbar support)	AR91.25-D-1450TS
7	Disconnect electrical connector (1).	Unlock the electrical connection (1).
8	Remove electrical wiring harness (2).	Note position of electrical wiring harness (2). Otherwise, the electrical wiring harness (2) may be damaged.
		Remove retaining clip (3). Check retaining clip (3) for damage. Clip remover If retaining clip (3) is damaged, replace retaining clip (3).	Fig 1
9	Remove retaining clip (4).	Model 907 with code Sh1 (Driver thorax/pelvis side airbag) or code SH2 (Front passenger thorax/pelvis side airbag) Check retaining clip (4) for damage. Clip remover If retaining clip (4) is damaged, replace the retaining clip (4).	Fig 1
10	Remove seat backrest frame (5). Notes on self-locking nuts and bolts	Remove screws (6) for this.	AH00.00-N-0001-01A
		Screw/bolt, backrest frame to seat frame	*BA91.10-N-1005-01TS
11	Remove holder (7) from seat backrest frame (5). General information on riveting	Model 907 with code S22 (Armrest for driver's seat) or code S25 (Armrest for front pasenger seat) If that backrest frame (5) or the holder (7) is replaced. Commercially available devices/tools  Hand drill Hand riveter To do this, bore out rivets (8).	AH60.00-P-0003-01N
12	Install in the reverse order
	Check
13	Perform function check of front seat.

FRONT SEATS

Fig 1: Clip Remover (452 589 01 63 00)