Remove/Install Heated Seats Control Unit - Ar91.30-D-0030TS

Model 907 

with code H15 (Seat heater for front passenger) 

with code H16 (Seat heater for driver) 

Shown on model 907 with code S23 (Front passenger bench seat) 

	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Adjust front seat until the seat heating control unit (1) is accessible.
2	Fold seat cushion padding forward.	Model 907 with code S23 (Two seater front passenger seat)	AR91.10-D-1035TS
3	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
4	Disconnect electrical connection (2, 3).	To do so, release electrical connectors (2, 3).
5	Release seat heating control unit (1).	To do so, release catch hooks (4) (arrows A).
6	Remove seat heating control unit (1).	To do so, push seat heating control unit (1) from holder (6) (arrow B). Installation  : Push catches (5) into holder (6).
7	Install in the reverse order
	Check
8	Perform function check of seat heating.