Remove/Install Passenger Bench Seat Backrest Adjustment Release Lever Trim - Ar91.21-D-3511TSK

MODEL 907.6/7 

with code UR8 (Pass. compt. seats, 2seat bench 2nd row, luxury) 

with code UR9 (3-passenger bench seat, Comfort, 3rd row) 

with code US1 (2-passenger bench seat, comfort, 1st rear row) 

with code UT4 (Passenger compartment seats, 2-passenger bench seat, 3rd row, Comfort) 

with code UY1 (3-passenger bench seat, Comfort, 1st row, narrow) 

with code UY2 (3-passenger bench seat, Comfort, 2nd row, narrow) 

with code UY4 (3-passenger bench seat, Comfort, 1st row) 

with code UY5 (3-passenger bench seat, Comfort, 2nd row) 

MODEL 907.745 

with code U3Y (3-passenger bench seat, Comfort, 3rd row, narrow) 

	Risk of injury  . Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
	Remove/install
1	Operate lever (1).	Installation:  Observe position of grooved pin (2) relative to trim (3), seat backrest padding (4) or seat backrest cover (5). Otherwise, damage to trim (3), seat backrest padding (4) or seat backrest cover (5) may occur. To do so, hold lever (1) in uppermost position after operating.
2	Remove grooved pin (2).	For this purpose use suitable tool.
3	Remove expansion rivet (6).	Check expansion rivet (6). If expansion rivet (6) is damaged. ↓ Replace expansion rivet (6).
4	Remove release lever trim (7).	To do so, detach release lever trim (7) from lever (1).
5	Install in the reverse order